Push Type Internal Tube Cutter - ATP

We are offering Push Type Internal Tube Cutter - ATP 5/8"- 1 1/2" O.D.
• NIKSU "Push Type" Internal Tube Cutter quickly cuts through the walls of ferrous tubes in Condensers and Heat Exchangers as a step in    their removal from the tube sheet. 
• This sturdy "Push Type" Internal Tube Cutter can be used with a portable Electric or Air Drill Motor.
• "Push Type " Cutter is simple to operate. Merely insert it into the tube, apply power, press inward and the tube can be cut in a few seconds. Releasing of inward pressure automatically retracts the Cutter Bit. This Cutter is equipped with an adjustable collar suitable for    reaching into tubes at various depths. 
• The replaceable cutting bit can be interchanged in a few seconds. Standard adjustable reach is 4" (101.6mm) and they are available in optional increments of 2"(50.8mm)."A" reach = 6" (152.4mm). "B" reach = (203.2mm). "C" reach = 10" (254.0mm) etc. All Tube Cutter come    with a complete set of pilots covering the entire range of tube thickness for a particular tube O.D. (ATP-625 tube cutters come with a built    in pilot suitable for one tube ID only.) 
• All Cutters are available for MM tube sizes also.

Note : When ordering Spare Cutting Bits, Please specify whether ordering for Non Ferrous, Ferrous or Stainless Tubes. Cutter Bits for these 3 type of tubes are different. Please refer to operation manual for parts list detailed features.

Tube cutter drives

Note :  All tube cutter drives are fitted with Model SF-1 self feed attachment. Cutting speeds are crucial for different material