Tube Removal Tools
We are offering Tube Removal Tools
3/8"- 4" O.D.
• Used to 'thin' the walls of heavy gauge tubes as a step in their removal from tube sheet.
• Suffix model number with tube gauge when ordering. Example for 3/4" OD. 16G, model no. will be WR-750-16.
• Wall reducers available for mm tube sizes also. Please enquire.
• Wall reducers are suited for tube sheets up to 5" thick. Longer reaches are available.
Tube O.D. inch |
Model Number |
MT Shank # |
3/8 |
WR-375 |
1 |
1/2 |
WR-500 |
2 |
5/8 |
WR-625 |
2 |
3/4 |
WR-750 |
2 |
7/8 |
WR-875 |
3 |
1 |
WR-1000 |
3 |
1.1/4 |
WR-1250 |
3 |
1.1/2 |
WR-1500 |
3 |
1.3/4 |
SH-1750 |
3 |
2 |
SH-2000 |
3 |
2.1/2 |
SH-2500 |
4 |
2.3/4 |
SH-2750 |
4 |
3 |
SH-3000 |
4 |
3.1/4 |
SH-3250 |
4 |
3.1/2 |
SH-3500 |
4 |
4 |
SH-4000 |
4 |
• Used with pneumatic chipping hammer to knok out tubes / tube stubs from tube sheet.
• Available in 01 and 06 shanks as standard. 15 (Jumbo) shank available on request.
• Suiffx model number with tube gauge and shank when ordering. Example for 3/4" O.D. 16G, 06 shank, model number will be KT-750-16-06.
• Tube Drifts are available for mm tube sizes also.
• Standard reach is 6". Longer reaches are available.
Tube O.D. inch |
Model Number |
3/8 |
KT-375 |
1/2 |
KT-500 |
5/8 |
KT-625 |
3/4 |
KT-750 |
7/8 |
KT-875 |
1 |
KT-1000 |
1.1/4 |
KT-1250 |
1.1/2 |
KT-1500 |
1.3/4 |
KT-1750 |
2 |
KT-2000 |
2.1/2 |
KT-2500 |
2.3/4 |
KT-2750 |
3 |
KT-3000 |
3.1/4 |
KT-3250 |
3.1/2 |
KT-3500 |
4 |
KT-4000 |
• Used to collapse tube and drive out collapsed tube from tube sheet with a chipping hammer.
• Recommended for use on 16G and thinner tubes.
• Available on 01 and 06 shanks as standard.
• Suffix model number with shank number when ordering. Example for 3/4" O.D. 16G, 06 shank, model number will be CT-750-06.
• Collasping tools are available for mm tube sizes and larger tube sizes.
Tube O.D. inch |
Model Number |
3/8 |
KT-375 |
1/2 |
KT-500 |
5/8 |
KT-625 |
3/4 |
KT-750 |
7/8 |
KT-875 |
1 |
KT-1000 |
1.1/4 |
KT-1250 |
1.1/2 |
KT-1500 |
1.3/4 |
KT-1750 |
2 |
KT-2000 |
2.1/2 |
KT-2500 |
2.3/4 |
KT-2750 |
3 |
KT-3000 |
3.1/4 |
KT-3250 |
3.1/2 |
KT-3500 |
4 |
KT-4000 |
Model CH-1 - Specificaion
Chipping Hammer with safety retainer for use with Tube Drifts / Collapsing Tools
Blows/mm |
Bore |
Stroke |
Weight |
1600 |
1.1" (28.5mm) |
3.1/4" (82.5mm) |
16lbs (7.0kg) |